image description

Description: Engine Flush is a specially formulated combination of additives and carrier fluid in combination with the carrier fluid the highly effective detergent and dispersant additives dissolve sludge and lacquer formers. All types of oilsoluble and oil insoluble residue are brought into suspension and removed during the next oil change. An Engines which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performances characteristics.

Application: Cleaning and flushing out the oil circuits of gasoline and diesel engines. The use of engine flush is Dependent on the degree of contamination of the oil circuit. Not suitable for use on motorbikes with wet clutches. One 300ml can is sufficient for up 6 liters of oil. Add engine flush to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for
approx 10 minutes Then change the oil and the filter. Engine flush is compatible with all commercially available motors oils


  • Part No.
  • EFCCC87