CAVITY PROTECTION

Description: Solvent –based corrosion inhibitor for cavity protection. It is supplied as a thin, light thixotropic solution with good atomizing properties so that it can also reach relatively inaccessible areas such as narrow gaps between panels. Cavity protection infiltrates and displaces moisture. The product contains a high proportion of rust inhibitors. Cavity protection is very finely atomized during spraying, has outstanding creep properties well into narrow gaps which need protection (such as welded seams) but does not run significantly out of seams. One drying completely, this product forms a plastic, water-repellent waxy film.

Application: Cavity Protection is mainly used in the workshop for spraying the inner surfaces of cavities such as the frame side members or the doors. The product can also be used to supplement the existing repairs. Any rust which may be resent on the surfaces to be treated must be thoroughly removed before treatment. The material can be used at low temperature above 10°c.but creep behavior is improved if the product and the surfaces to be treated are at
room temperature. Cavity protection ab be applied using the pressure feel spray gun for cavities, part no: 6226 at an operating pressure of 2-8 bar depending on the spray pattern desired. Shake contents of can vigorously before use. The drying process may take several days, depending on the type of cavity being treated and the thickness of the film .Adequate ventilation must be provided during drying.