CORROSION PROTECTION

  • UNDER COAT RESIN BASE

    Description: 

    Under seal is bitumen – free, highly abrasion and solvent -containing coating material based on Rubber and resins for the permanently flexible corrosion protection 
    of underbodies, stone guard and anti Drumming .When thoroughly dry, the coating provides permanently flexible corrosion protection with high Resistance to aging and 
    does not become brittle in cold weather. The dry coat adheres well to the cleaned Underbody, even on painted surfaces PVC, and is characterized by a very high 
    resistances to abrasion. 

    Application: 

    The Surfaces which have to be treated with under seal must be thoroughly cleaned beforehand. Rust Must be removed .The surfaces must be dry and free of wax, dirt 
    and grease and extensively free of dust. Is to be Applied with Part no: 8020 Moto lube Anti corrosive spray gun.

    Part NoContentsUnits in Carton
  • UNDERSEAL PROTECTION BITUMENS BASE

    Description: 

    Under seal is a thixotropic mixture of bitumen''s, synthetic resins , solvents and special inhibitors. After evaporation, a tough elastic film remains which provides 
    protection against environmental effects and Corrosion from de-icing salt. Underseal has excellent corrosion properties. The product is thixotropic and is Therefore 
    applied as non-drip coating. This means that the product can be painted on in thick layers within a Single application. 

    Application: 

    The surfaces which have to be treated with under seal must be thoroughly cleaned beforehand. Rust Must be removed. The surfaces must be dry and free of wax, dirt and 
    grease and extensively free of dust. It is to be Applied with part No.8020 Moto chem. Anti Corrosive Spray gun.

    Part NoContentsUnits in Carton
  • ANTI CORROSIVE TREATMENT WATER BASE

    Description: 

    The Product is made out of industrial hydro-carbon resin formed by heavy duty emulsion polymerizations process. It is pigmented with anti corrosive pigmented with 
    anti corrosive pigments for better strength , opacity and water resistances properties , ideally recommended as protection over steel concrete Structure as water 
    proofing / anticorrosive medium. 

    Application: 

    Stir the contents thoroughly well before use. The product is supplied in ready use consistency. If Required 5-10% good water can be added to suit application. After 
    the painting operation is over all the mixing Equipments, spray gun, hoses, pipeline and stirrer has to be cleaned with water. If not cleaned properly, the cured 
    Coating film may from bits in the coating during next day application. 

    Part NoContentsUnits in Carton
  • CAVITY PROTECTION

    Description: 

    Solvent –based corrosion inhibitor for cavity protection. It is supplied as a thin, light thixotropic solution with good atomizing properties so that it can also 
    reach relatively inaccessible areas such as narrow gaps between panels. Cavity protection infiltrates and displaces moisture. The product contains a high proportion 
    of rust inhibitors. Cavity protection is very finely atomized during spraying, has outstanding creep properties well into narrow gaps which need protection 
    (such as welded seams) but does not run significantly out of seams. One drying completely, this product forms a plastic, water-repellent waxy film. 

    Application: 

    Cavity Protection is mainly used in the workshop for spraying the inner surfaces of cavities such as the frame side members or the doors. The product can also be 
    used to supplement the existing repairs. Any rust which may be resent on the surfaces to be treated must be thoroughly removed before treatment. The material can 
    be used at low temperature above 10°c.but creep behavior is improved if the product and the surfaces to be treated are at room temperature. Cavity protection ab be 
    applied using the pressure feel spray gun for cavities, part no: 6226 at an operating pressure of 2-8 bar depending on the spray pattern desired. Shake contents 
    of can vigorously before use. The drying process may take several days, depending on the type of cavity being treated and the thickness of the film .Adequate
    ventilation must be provided during drying.

    Part NoContentsUnits in Carton
  • UNDERSEAL TRANSPARENT

    Description: 

    Vehicle body is under continuous attack by corrosive elements such as unnoticed rain water, water enters through doors , glass channels during washing and gets
    deposited the inside the doors , mudguard and running board etc. These are also the known clear of rust .Moto chem. Transport anti rust treatment is crystal clear 
    rust penetration from inside to outside. It is formulated to provide long term protection to cars under bonnet hood under body, mudguard, running board, and dicky 
    inner surface to a corrosive environment. 

    Application: 

    The surfaces which have to be treated with under seal (Transparent) must be thoroughly cleaned beforehand. Rust must be removed. The surfaces must be dry and free 
    of wax, dirt and grease and extensively free of dust. Is to be applied with part no: 8020 Motochem Anti corrosive Spray gun. 

    Part NoContentsUnits in Carton
  • SILENCER COATING

    Description: 

    Silencer coating is a heat resistant (up to 600 °c) corrosion protective coating for metals based on a special combination of pure zinc and aluminum and 
    modern resins. It builds up a very heat resistant film that has good adhesion and anti corrosion properties. It builds up a very heart resistant film that has good 
    adhesion and anti-corrosion properties and gives many things , such as exhaustion pipes , grills and stoves a new look. The spray can be used on many metals, such as
    Iron, steel, galvanized steel, white iron and cast iron, copper brass etc. 

    Application: 

    It can be used as a primer under a (heat resistant) topcoat or as a one can system ( 2 layer primer/topcoat) Direction before use : Free surface of rust and dirt ; 
    Coverthe parts which should not to painted. Shake the aerosol well before, use during 2 to 3 minutes.. Spray several thin layers from a distance of appr 20-30cm. After 
    use, clear the nozzle by spaying upside down until only pure propellant emerges.

    Part NoContentsUnits in Carton
  • ENGINE GLOSS (PU COATING)

    Description: 

    High gloss water repellent protective paint for preserving the engine compartment .The engine looks new again prevents corrosion and repels dirt. Protect the engine,
    ignition leads and system from damp. Compatible with rubber and plastic components. 

    Application: For all engine compartments and engines in passenger vehicles, commercial vehicles buses and two wheeled vehicles.

    Part NoContentsUnits in Carton